2-way solenoid valve, servo actuated, NC (normally closed)
The water guard of the type MW 252-002 is a functional system consisting of an electronically controlled solenoid valve and sensors. After switching on the mains voltage, the electronics open the solenoid valve. The sensor detects a water film from approx. 0.5 mm and sends a signal to the control electronics. The solenoid valve is closed and an acoustic alarm signal is triggered. The solenoid valve is installed in the water supply line.
|Application||Neutral, electrical conducting liquids, water|
|Way function||2-way function NC|
|Possible seals||NBR EPDM FPM|
|Kv-value||≥ 5,60 m³/h|
|Nominal size||15,00 mm|
|Voltages AC||230 V|
|Pressure range AC||0,5 - 10 Bar|
All specified values are based on our experience. These approximate values are only applicable for guidance. Product details as well as expressly stipulated performance characteristics/operational purposes shall not relieve the customer of the need to test and validate the product for the intended purpose.
Staiger product database 0.13
© Staiger GmbH & Co. KG